METAL PRIMER (GREY) (anti-corrosion primer for metal surfaces)
- category: CHROMODOMI / მეტალის ანტიკოროზიული საღებავები
- Brands: CHROMODOMI
High quality primer with excellent anti-corrosion properties. Protects any metal surface andprepares it for the application of the finishing coa... See more
High quality primer with excellent anti-corrosion properties. Protects any metal surface and
prepares it for the application of the finishing coat. Dries quickly and withstands high temperatures (up
to 100°C). Suitable for cars, railings, radiators and any surface requiring corrosion protection.
- Color: available in gray, black, red-ochre, turquoise and brown.
- Packaging: 375ml, 750ml, 2.5L, 9L.
See less
Surface preparation:
- To ensure reliable adhesion of the product, the surface must be clean, dry and free from defects such
as adhering materials, dust, grease, oil, rust, moss, steam, etc.
- Apply by brush, roller or sprayer and wait 20-40 minutes for it to dry.
- Sand the surface with suitable sandpaper to obtain a smooth surface, preparing it for the next coat.
- It reaches full resistance to mechanical stress after 20-30 days.
Conditions of use:
- Do not use (apply) at temperatures below 6 °C and above 40 °C and relative humidity above 80%.
Unfavorable operating conditions may change the quality properties of the product.
Application tools:
- Brush.
- Roller.
- Sprayer.
Keep the tools in the container “wet” during operation. Drain paint from tools into container and rinse
tools with white spirit only. If the paint has dried, only a strong detergent can be used to scrub it off. Do
not pour the washing water into groundwater.
Consumption: 10 - 12 m2/liter per person;
Dilution: 1 - 5% nitro solvent or white spirit;
Drying time: 20 - 40 minutes, depending on the conditions of application;
Precautions: Keep out of reach of children. Avoid contact with skin and/or eyes. In case of contact with
eyes, rinse immediately with running water, seek medical advice if necessary. If swallowed, seek medical
advice immediately. The workplace should be well ventilated. Wear personal protective equipment
during application.
Maximum content of volatile organic compounds:
The permissible amount of VOCs for this product category is 350 g/l. The amount of VOCs in this
product is 345 g/l, which complies with the European Union requirements for this type of product.
Waste management:
In order not to pollute the environment, production waste requires special recycling. Therefore, do not
dispose of it together with household waste. Please contact your local authorities for more information
on waste collection and disposal.
Storage: After use, close the container tightly and store for future use. Store in a cool place. Keep away
from freezing and direct sunlight.
The entry “EL.OT * 7.88.” referring to the characteristic of the paint is part of the Greek standard
according to which the characteristics of the paint are defined.
Products offered
delivery
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available."
Delivery time:
- Tbilisi
Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
METAL PRIMER (GREY) (anti-corrosion primer for metal surfaces)
choose a product
- Acrylic paint for facade COVER-ACRYL (ΒΑSE Ρ) (1L. 3L. 9L. 16L)
- Silicone Facade Paint LIFE SIL (BASE D) 10LT
- Paint water-based interior ECO LIFE (BASE P) 10LT
- Varnish for wood, glossy RED-SUN No858 WALNUT 2.5l
- THERMOFLEX (BASE Ρ) 10LT
- Wood Surface Protector - WOOD CARE No800 Transparent 2.5LT
- Silicone paint Cover Sil 16 LT
- Varnish for stone and concrete. Smooth. STONE VARNISH WATER MATT 2,5LT
- Quick-drying primer for metal PRIMER FAST-DRYING (grey) 16 l
- Paint with aging effect CHALK PATNT EFFECT (BASE D) 0,375LT
- Paint with aging effect CHALK PAINT EFFECT (BASE D) 0,75LT
- Silicone Facade Paint LIFE SIL (BASE TR) 10LT
- Water-based wood varnish, glossy WATER RED-SUN CLEAR 2.5l
- METAL PRIMER (OXIDE RED) 0.75LT (Anti-corrosion primer for metal surfaces)
- Water-based enamel paint for metal and wood WATER STEP-LAC SATINE (base D) 2.5 l
- Anti-corrosion primer. METAL PRIMER (black) 2.5 l
- Enamel 3 in 1.FAST & Right (base D) 2.5 l
- CHASSIS COAT 2.5LT corrosion protection enamel paint
- Anti-corrosion Master Antipass 1
- Enamel anti-corrosion paint CHASSIS COAT 0.75LT
Surface preparation:
- To ensure reliable adhesion of the product, the surface must be clean, dry and free from defects such
as adhering materials, dust, grease, oil, rust, moss, steam, etc.
- Apply by brush, roller or sprayer and wait 20-40 minutes for it to dry.
- Sand the surface with suitable sandpaper to obtain a smooth surface, preparing it for the next coat.
- It reaches full resistance to mechanical stress after 20-30 days.
Conditions of use:
- Do not use (apply) at temperatures below 6 °C and above 40 °C and relative humidity above 80%.
Unfavorable operating conditions may change the quality properties of the product.
Application tools:
- Brush.
- Roller.
- Sprayer.
Keep the tools in the container “wet” during operation. Drain paint from tools into container and rinse
tools with white spirit only. If the paint has dried, only a strong detergent can be used to scrub it off. Do
not pour the washing water into groundwater.
Consumption: 10 - 12 m2/liter per person;
Dilution: 1 - 5% nitro solvent or white spirit;
Drying time: 20 - 40 minutes, depending on the conditions of application;
Precautions: Keep out of reach of children. Avoid contact with skin and/or eyes. In case of contact with
eyes, rinse immediately with running water, seek medical advice if necessary. If swallowed, seek medical
advice immediately. The workplace should be well ventilated. Wear personal protective equipment
during application.
Maximum content of volatile organic compounds:
The permissible amount of VOCs for this product category is 350 g/l. The amount of VOCs in this
product is 345 g/l, which complies with the European Union requirements for this type of product.
Waste management:
In order not to pollute the environment, production waste requires special recycling. Therefore, do not
dispose of it together with household waste. Please contact your local authorities for more information
on waste collection and disposal.
Storage: After use, close the container tightly and store for future use. Store in a cool place. Keep away
from freezing and direct sunlight.
The entry “EL.OT * 7.88.” referring to the characteristic of the paint is part of the Greek standard
according to which the characteristics of the paint are defined.