icopal most - ICOPAL
- category: Roll waterproofing
- Brands: ICOPAL
Roll-fed polymeric-bitumen SBS-modified material is made on a non-woven basis from high durability polyester with fine-grained sand on the top side. O... See more
Roll-fed polymeric-bitumen SBS-modified material is made on a non-woven basis from high durability polyester with fine-grained sand on the top side. On the lower side the material has a longitudinally corrugated torchable layer developed by use of a protective “Profile SBS” technology and coated with an easily flammable polyethylene film.
See less
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Width, m |
1 |
|
Length, m |
8 |
|
Thickness, mm, not less |
4,5 |
|
Weight, kg/m2 |
5,5 |
|
Base |
High durability polyester |
|
Breaking load under tension, N/50 mm, not less |
600 |
|
Heat resistance during two hours at the temperature of °С, not lower |
100 |
|
Radius of curvature with radius at bent 30 mm at the temperature of °С, not above |
- 25 |
|
Waterproofing under a pressure 0.001 MPa, not lower, during 72 hours |
No signs of water leak |
PACKAGING AND STORAGE
Delivered in rolls on trays. Trays are packed in polyethylene film.
Material must be stored vertically as one tier. Protect from moisture and direct sunlight.
-
reliabilityanddurability;
-
fast mounting;
-
high physical and mechanical characteristics;
-
full compliance with the existing normative regulations;
-
applicable in all climatic zones of Russian Federation;
application area:
- Waterproofing of reinforced-concrete slab of traffic area.
- Waterproofing of vertical and horizontal surfaces of tunnel structures in cut-and-cover construction.
- The materials fully comply with the requirements of the existing normative regulation GOST Р 55396 «Roll-fed Bitumen-polymeric Materials for Waterproofing of Bridge Constructions. Technical Regulations» and the requirements for methodology of their testing.
application method:
- Fusion-bond to base.
Products offered
SINTAN Solo Vent FM ECM 6.5 kgm2 (17m)
- category: Waterproofing / Roll waterproofing
- Brands: ICOPAL
PLASTOPER PG4W GREY Tkp 4.0 kg/m² (1x10 m)
- category: Waterproofing / Roll waterproofing
- Brands: RAVAGO
Hydrostekloizol TPP 3.5 (1*10m2) )
- category: Waterproofing / Roll waterproofing
- Brands: KRZ
Reinforced polyethylene membrane 3.0 - 100 g (1.5 x 50m) (75m2)
- category: Roll waterproofing
delivery
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available."
Delivery time:
- Tbilisi
Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
icopal most - ICOPAL
choose a product
- IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- Hydrostekloizol EKP - 4.5
- Imper Balance B 4.5 -EKP 4.5 kg / m2, 10 m2
- SINTAN Solo Vent FM ECM 6.5 kgm2 (17m)
- Imper Standard (T) V - TKP 4.0 kg/m2, 10 m2
- IMPER BALANCE H 3,5 - EPP 3.5 kg / m2, 10 m2
- PLASTOPER PG4W GREY Tkp 4.0 kg/m² (1x10 m)
- Ultranap - ICOPAL
- Hydrostekloizol TPP 3.5 (1*10m2) )
- Hydroizol TKP 3.2 (1*10m2)
- Hydroisol TPP 3.0 (1*10m2)
- Reinforced polyethylene membrane 3.0 - 100 g (1.5 x 50m) (75m2)
- Hydroisol TPP 2.5 (1*10m2)
- icopal ultra Н
- Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Width, m |
1 |
|
Length, m |
8 |
|
Thickness, mm, not less |
4,5 |
|
Weight, kg/m2 |
5,5 |
|
Base |
High durability polyester |
|
Breaking load under tension, N/50 mm, not less |
600 |
|
Heat resistance during two hours at the temperature of °С, not lower |
100 |
|
Radius of curvature with radius at bent 30 mm at the temperature of °С, not above |
- 25 |
|
Waterproofing under a pressure 0.001 MPa, not lower, during 72 hours |
No signs of water leak |
PACKAGING AND STORAGE
Delivered in rolls on trays. Trays are packed in polyethylene film.
Material must be stored vertically as one tier. Protect from moisture and direct sunlight.