bitumen primer - ICopal
- category: Coating waterproofing
- Brands: ICOPAL
Bitumen Primer Icopal consists of high quality petroleum bitumen and organic solvents. The product is ready for use.
Bitumen Primer Icopal consists of high quality petroleum bitumen and organic solvents. The product is ready for use.
See less
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Average flow rate, l/m2 |
0,3 |
|
Drying time at +20°С, hr, not more |
4 |
|
non-volatile matter content, %, not less |
35 |
|
relative viscosity, seconds, not more |
30 |
|
Dry residue melting point, °С, not less |
70 |
- Low flow rate;
- Short drying period.
APPLICATION AREA
Concrete, sand-cement and metal surface priming before application of welded and self-adhesive roofing and waterproofing rolled bitumen materials, and before application of mastics
APPLICATION METHOD
Application of bitumen primer is carried out with a brush, a paint roller or by spraying at the ambient temperature that varies from -5°С to +45°С. At the temperature that is lower than +5ºС, primer should be conditioned in a warm space for 24 hours at the temperature of no lower than +15ºС.
Before use, the whole volume of primer of the bitumen should be thoroughly mixed. If necessary, it can be diluted with white spirit, kerosene oil or solvent petroleum spirit. The working surface should be dry, pre-cleaned from dust, dirt, snow and ice.
Application of rolled materials and mastics is allowed only after primer is fully dried. It is important to wear gloves when working with the materials. Contact of the materials with eyes and skin is to be avoided.
Products offered
WEBER DRY SS-7 EASY LIQUID 6KG
- category: Coating waterproofing
- Brands: WEBER
ICOPER MULTIUSO 5KG ROSSO- უნივერსალური პოლეურეთანის მემბრანა
- category: Coating waterproofing
- Brands: ICOBIT
Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- category: Coating waterproofing
- Brands: FOX BAU
Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- category: Coating waterproofing
Waterproofing mastic Profimast (5 l / 4.5 kg)
- category: Coating waterproofing
Two-component injection solution - FOX INJECTION EP FC420
- category: Coating waterproofing
- Brands: FOX BAU
Two-component polyurethane wear-resistant membrane- BALCONY ANTISKID (Comp A+B) 4KG
- category: Coating waterproofing
- Brands: ICOBIT
crystallizing waterproofing FOX CRYSTALISER FS265 20kg
- category: Coating waterproofing
- Brands: FOX BAU
Liquid waterproofing of temperature seams FOX PURMAX MASTIC SET-5 kg set
- category: Coating waterproofing
- Brands: FOX BAU
Liquid Extra Strength Membrane - KEEP DRY 18KG ROSSO MARTE
- category: Coating waterproofing
- Brands: ICOBIT
fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- category: Coating waterproofing
- Brands: MAPEI
delivery
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available."
Delivery time:
- Tbilisi
Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
bitumen primer - ICopal
choose a product
- WEBER DRY SS-7 EASY LIQUID 6KG
- ICOPER MULTIUSO 5KG ROSSO- უნივერსალური პოლეურეთანის მემბრანა
- Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- Bitumen waterproofing Icopas 18kg
- KEEP DRY
- Primer bituminous Profimast (21.5 l / 16 kg)
- Waterproofing mastic Profimast (5 l / 4.5 kg)
- Two-component injection solution - FOX INJECTION EP FC420
- Two-component polyurethane wear-resistant membrane- BALCONY ANTISKID (Comp A+B) 4KG
- crystallizing waterproofing FOX CRYSTALISER FS265 20kg
- Liquid waterproofing of temperature seams FOX PURMAX MASTIC SET-5 kg set
- Liquid Extra Strength Membrane - KEEP DRY 18KG ROSSO MARTE
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- FOX EPOMORTAR FC510
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Average flow rate, l/m2 |
0,3 |
|
Drying time at +20°С, hr, not more |
4 |
|
non-volatile matter content, %, not less |
35 |
|
relative viscosity, seconds, not more |
30 |
|
Dry residue melting point, °С, not less |
70 |