Bitumen waterproofing Plastimul / 20 kg
- category: Coating waterproofing
- Brands: MAPEI
Plastimul is a solvent-free paste consisting of selected water-emulsied bitumens, special ne-graded aggregates and admixtures, manufactured accor... See more
Plastimul is a solvent-free paste consisting of selected water-emulsied
bitumens, special ne-graded aggregates and admixtures, manufactured according to a formula developed in MAPEI Research & Development Laboratories. Plastimul’s thixotropic consistency makes it easy to use for waterproong even vertical and sloping surfaces. When completely dry Plastimul forms a waterproof plastic coating that is resistant to re-emulsifying after prolonged immersion in water, even when slightly acid or alkaline, and resistant to aggressive agents present in the soil. Plastimul meets the requirements for polymer modied bituminous thick coatings, in compliance with EN 15814.
See less
Waterproong foundations.
· Waterproong bearing walls.
Some application examples · Cold waterproong masonry or concrete poured over bare ground. · Waterproong at or curved surfaces on structures below ground level, such as man-made tunnels and underpasses. · Waterproong horizontal concrete structures below screeds isolated with PE sheets (in such cases we recommend applying Mapelastic on the screed before installing ooring to protect the screed).
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Bitumen waterproofing Plastimul / 20 kg
choose a product
- crystallizing waterproofing FOX CRYSTALISER FS265 20kg
- Self-adhesive waterproofing tape 5x1000 cm - BUTYLSTRIP
- one-component injection solution 20 kg - Resfoam 1K-M
- Coating waterproofing FOX WATERPROF FS100 4 kg
- Liquid waterproofing of temperature seams FOX PURMAX MASTIC SET-5 kg set
- Two-component injection solution - FOX INJECTION EP FC420
- Primer bituminous (Primer) Profimast (5 l / 4.5 kg)
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- injection packer - Idrostop Multi ST
- Cement-based waterproofing – FOX MULTISEAL FS367 25kg
- Polyurethane-based waterproofing FOX PURMAX FS601 WHITE 25kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- Transparent polyurethane membrane - BALCONY WATER 10KG
- ICODIL SX 4KG - უნივერსალური გამხსნელი
- Bitumen primer on solvent base POLYCOLL 25kg