Bitumen waterproofing Plastimul / 20 kg
- category: Coating waterproofing
- Brands: MAPEI
Plastimul is a solvent-free paste consisting of selected water-emulsied bitumens, special ne-graded aggregates and admixtures, manufactured accor... See more
Plastimul is a solvent-free paste consisting of selected water-emulsied
bitumens, special ne-graded aggregates and admixtures, manufactured according to a formula developed in MAPEI Research & Development Laboratories. Plastimul’s thixotropic consistency makes it easy to use for waterproong even vertical and sloping surfaces. When completely dry Plastimul forms a waterproof plastic coating that is resistant to re-emulsifying after prolonged immersion in water, even when slightly acid or alkaline, and resistant to aggressive agents present in the soil. Plastimul meets the requirements for polymer modied bituminous thick coatings, in compliance with EN 15814.
See less
Waterproong foundations.
· Waterproong bearing walls.
Some application examples · Cold waterproong masonry or concrete poured over bare ground. · Waterproong at or curved surfaces on structures below ground level, such as man-made tunnels and underpasses. · Waterproong horizontal concrete structures below screeds isolated with PE sheets (in such cases we recommend applying Mapelastic on the screed before installing ooring to protect the screed).
Products offered
delivery
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available."
Delivery time:
- Tbilisi
Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Bitumen waterproofing Plastimul / 20 kg
choose a product
- Two-component injection solution Foamjet T 20+24kg
- Primer bituminous Profimast (21.5 l / 16 kg)
- Transparent polyurethane membrane - BALCONY WATER 10KG
- Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- universal solvent - ICODIL SX
- crystallizing waterproofing FOX CRYSTALISER FS265 20kg
- Waterproofing material R-COMPOSIT 10 KG
- FOX FASTMORTAR FC233 25kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- Primer bituminous (Primer) Profimast (5 l / 4.5 kg)
- FOX GROUT FC155 (R4) 25kg
- Two-component injection solution - FOX INJECTION EP FC420
- bitumen primer - ICopal
- Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP