METAL PRIMER (OXIDE RED) 0.75LT (Anti-corrosion primer for metal surfaces)
- category: Varnishes and accessories / CHROMODOMI
- Brands: CHROMODOMI
High-quality primer with excellent anti-corrosion properties. It protects all types of metal surfaces and prepares them for final coat (layer) applica... See more
High-quality primer with excellent anti-corrosion properties. It protects all types of metal surfaces and prepares them for final coat (layer) application. Dries quickly and withstands high temperatures (up to 100°C). Suitable for automobiles, railings, radiators and any surface that needs protection from corrosion.
- Colors: Available in gray, black, red oxide, white and brown colors.
- Packaging: 375ml, 750ml, 2.5L, 9L.
See less
SURFACE PREPARATION:
- To ensure reliable adhesion of the product, the surface must be clean, dry and free from defects such as loose (crumbling) materials, dust, grease, oil, rust, mold, steam, etc.
- Apply with brush, roller or sprayer and wait for drying 20-40 minutes.
- Sand with appropriate sandpaper to achieve smooth surface, prepare surface for next coat application.
- Achieves full resistance to mechanical loads in 20-30 days.
APPLICATION CONDITIONS:
- Do not use (apply) at temperatures below 6°C and above 40°C, or at relative humidity exceeding 80%. Unfavorable conditions for use may change the quality properties of the product.
APPLICATION TOOLS:
- Brush.
- Roller.
- Sprayer. During work, keep tools in "wet" condition in container. Fully return product (paint) from tools to container and wash tools only with white spirit. If product (paint) dries, clean it only with strong detergent. Do not allow wash water to enter groundwater (ground). Coverage: 10-12 m²/liter per coat; Dilution: 1-5% with nitro thinner or white spirit; Drying: 20-40 minutes, depending on application conditions;
SAFETY STANDARDS: Keep out of reach of children. Avoid contact with skin and/or eyes. In case of eye contact, immediately rinse with running water, consult a doctor if necessary. In case of ingestion, immediately consult a doctor. Work area must be well ventilated. Use personal protective equipment during application. Maximum volatile organic substance indicator: For this category of product, the allowable amount of volatile organic substances is 350 g/l, the amount of volatile organic substances in this product, 345 g/l, complies with European Union requirements for this type of product. Waste management: To avoid environmental pollution, product residues require special treatment. Accordingly, do not dispose with household waste. For additional information on waste collection and disposal, contact local government authorities. Storage: After use, tightly close the container lid to preserve for future consumption. Store in a cool place. Protect from freezing and direct sunlight. The "EL.OT * 7.88." record related to paint characterization is part of the Greek standard, according to which paint characteristics are determined.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
METAL PRIMER (OXIDE RED) 0.75LT (Anti-corrosion primer for metal surfaces)
choose a product
- Solvent Master Sell Tiner 10 lt.
- Chrome Fasad 10 kg B2
- Paint roller 18 cm with handle 0111-384818
- Paint with aging effect CHALK PATNT EFFECT (BASE D) 0,375LT
- საღებავი წყალდისპ.შიდა სამუშ. STEP-LATEX HIGH LEVEL (BASE P) 0,97LT
- Acrylic Universal Enamel RAL 4008 Fresh Purple, Aerosol (520ml)
- Facade Paint – Chrome Fasad 3.5 kg A
- Enamel set "Vintage" - aging effect Old copper, aerosol (2 x 520 ml)
- საღებავი წყალდისპ.შიდა სამუშ. STEP-LATEX HIGH LEVEL (BASE D) 3LT
- Exterior primer ULTRA PRIMER 10LT
- Varnish for wood, glossy RED-SUN No858 WALNUT 2.5l
- Эмульсионная краска НАТУРА-ЛАТЕКС (1л. 3л. 9л. 15л)
- Silicone paint Cover Sil 16 LT
- Interior paint Master Plastik 25 kg
- Wallpaper to paint-263
- Varnish for wood, glossy RED-SUN No858 WALNUT 2.5l
- Varnish for stone and concrete. STONE VARNISH WATER 2,5Lt
- Paint with aging effect CHALK PATNT EFFECT (BASE D) 0,375LT
- STEP PRIMER (primer based on acrylic emulsion)
- Varnish for stone and concrete. Smooth. STONE VARNISH WATER MATT 2,5LT
- CHASSIS COAT 2.5LT corrosion protection enamel paint
- Acrylic paint for facades COVER-ACRYL WHITE
- Varnish for wood, glossy RED-SUN No857 0REGON 2.5l
- Paint with aging effect CHALK PAINT EFFECT (BASE D) 0,75LT
- ნიტრო გამხსნელი THINNER 0,75LT
- WOOD CARE-W Νο914 GREEN (ხის ზედაპირის დამცავი)
- Emulsion paint COVER-LATEX (BASE P) (1L. 3L. 9L. 16L)
- აკრილის საღებავი ფასადისთვის COVER-ACRYL (ΒΑSE D) 16LT
- WOOD CARE 0.75LT (protection agent for wooden surfaces)
- Emulsion paint for interior work STEP-LATEX HIGH LEVEL WHITE 10LT
SURFACE PREPARATION:
- To ensure reliable adhesion of the product, the surface must be clean, dry and free from defects such as loose (crumbling) materials, dust, grease, oil, rust, mold, steam, etc.
- Apply with brush, roller or sprayer and wait for drying 20-40 minutes.
- Sand with appropriate sandpaper to achieve smooth surface, prepare surface for next coat application.
- Achieves full resistance to mechanical loads in 20-30 days.
APPLICATION CONDITIONS:
- Do not use (apply) at temperatures below 6°C and above 40°C, or at relative humidity exceeding 80%. Unfavorable conditions for use may change the quality properties of the product.
APPLICATION TOOLS:
- Brush.
- Roller.
- Sprayer. During work, keep tools in "wet" condition in container. Fully return product (paint) from tools to container and wash tools only with white spirit. If product (paint) dries, clean it only with strong detergent. Do not allow wash water to enter groundwater (ground). Coverage: 10-12 m²/liter per coat; Dilution: 1-5% with nitro thinner or white spirit; Drying: 20-40 minutes, depending on application conditions;
SAFETY STANDARDS: Keep out of reach of children. Avoid contact with skin and/or eyes. In case of eye contact, immediately rinse with running water, consult a doctor if necessary. In case of ingestion, immediately consult a doctor. Work area must be well ventilated. Use personal protective equipment during application. Maximum volatile organic substance indicator: For this category of product, the allowable amount of volatile organic substances is 350 g/l, the amount of volatile organic substances in this product, 345 g/l, complies with European Union requirements for this type of product. Waste management: To avoid environmental pollution, product residues require special treatment. Accordingly, do not dispose with household waste. For additional information on waste collection and disposal, contact local government authorities. Storage: After use, tightly close the container lid to preserve for future consumption. Store in a cool place. Protect from freezing and direct sunlight. The "EL.OT * 7.88." record related to paint characterization is part of the Greek standard, according to which paint characteristics are determined.